Published on
A5 Double Sided Flyers: Size, Specs and Design Guide
You've got an offer ready, a logo in place and enough information to fill the screen. Then you switch the design to actual size and realise the booking details are tiny, the photograph crowds the headline and the reverse looks like a page of terms.
A5 double sided flyers work when each face has a distinct job. The front earns attention; the reverse helps someone decide and respond. Getting that balance right means checking the layout, paper and finished proof together, not treating the back as free storage for leftover copy.
A5 Flyer Dimensions, Bleed and Safe Area at a Glance
A5 double-sided flyer dimensions
| Element | Measurement | What it controls |
|---|---|---|
| Trim size (finished flyer) | 148 × 210 mm | Final size of each face after cutting |
| Bleed (each edge) | 3 mm | Background colour and images that extend past the cut line |
| Safe area (inside trim) | 3 to 5 mm from every edge | Text, logos, QR codes and contact details that must not be cut |
| Reverse face | Same 148 × 210 mm with its own bleed and safe area | Second layout, set with the flip direction in mind |
Adobe's A5 format guide identifies A5 as the ISO 216 size measuring 148 × 210 mm, or 14.8 × 21 cm, with half the area of A4. Double-sided printing gives you a full front and reverse at that finished size, not a reduced copy squeezed onto the back.
Separate the cut line from the artwork edge
Trim is where the printer cuts the sheet. Bleed is expendable artwork beyond that line, which prevents a slight cutting movement from exposing an unprinted white edge.
With the setup shown above, artwork including bleed occupies 154 × 216 mm. Keep the document's trim size at A5 and add bleed through the document settings rather than enlarging the finished page.
Say a café uses a photograph running off both side edges. Extend the photograph into the bleed, but keep menu text 5 mm inside the trim. The image can lose a narrow strip without harm; a clipped letter makes the flyer look faulty.
Avoid narrow decorative borders close to the cut. Even when nothing gets clipped, a small cutting shift can make a border look uneven.
Set page order and turning direction
Create a two-page document in InDesign, Affinity Publisher or your chosen design tool. Put the front on page one and the reverse on page two, both in the same orientation.
For a portrait proof, long-edge turning usually reads like a book; short-edge turning reads like a calendar. Confirm the printer's required orientation before rotating the reverse artwork, because production workflows don't all handle supplied pages identically.
- Make a paper dummy: Mark the top of each face, turn it as intended and compare it with the PDF.
- Export at actual size: Supply a print-ready PDF at 100 per cent, with photographs at an effective 300 dpi.
- Check the export settings: Use CMYK where requested and ensure every edge-to-edge background reaches the bleed line.
Before exporting, confirm three measurements: 148 × 210 mm trim, 3 mm bleed and a 3 to 5 mm safe area. Use the printer's template if its requirements differ.
Planning the Front and Reverse of a Two-Sided Flyer
Think of the front as the shop window and the reverse as the information counter. The window makes a promise that someone can understand quickly. The counter supplies the practical answers they need before acting.
Give the front a single primary action, whether that's booking a table, attending an event or claiming an offer. Reserve the reverse for booking steps, opening times, directions, qualifying terms and accessibility information.
Allocate space around readable text
The Government Communication Service accessibility standards recommend at least 12-point text, with 14-point preferable for many audiences, alongside clear typography, strong contrast and uncluttered layouts. Start with readable body copy, then decide how much information will fit.
Choose a sans-serif typeface with distinct letter shapes, such as Arial. Left-align paragraphs, give headings breathing room and avoid long italic passages or block capitals. Don't place essential words over a busy photograph, even if they appear legible on a bright monitor.
Shrinking a full terms section into 8-point type doesn't solve a space problem. It transfers the problem to the reader, particularly someone with a visual impairment or reading difficulty.
Allocation rule: Keep the promise on the front and the information needed to use it on the reverse. If neither face is readable, remove content before reducing type.
Make the reverse worth turning over
For a hypothetical two-for-one café offer, the front could show the offer, a food photograph and the booking action. The reverse could explain eligible items, booking steps, exclusions and step-free access. Don't repeat the headline at the same scale and leave the useful details cramped underneath.
Ask these questions while editing:
- Front recognition: Can someone read the main message at arm's length?
- Reverse value: Does the back add something the front doesn't?
- Scanning speed: Can a reader locate the important reverse-side details in ten seconds?
- Content fit: Would folded leaflets suit the information better than a crowded flat flyer?
Treat prices and restrictions as information, not visual clutter to hide. If the offer needs extensive explanation, simplify the offer or choose a format with more room.
Print the draft at actual size and read both faces under ordinary room light. A comfortable screen layout can become tiring on paper, especially when the reverse contains several paragraphs.
Using Both Sides for Trackable Calls to Action
Event handouts, restaurant offers, store openings, community campaigns and trade show follow-ups all benefit from a response route that works after the conversation ends. A recipient may keep the flyer until they have time to book, enquire or check the location.
A QR code can shorten that journey, but it shouldn't be the only route. Someone may have difficulty holding a phone steady, dislike scanning unfamiliar codes or be reading under poor lighting.
Give the reader a usable route
The University of Edinburgh guidance on accessible printed materials recommends sufficiently sized, high-contrast QR codes with a short printed URL alongside them, rather than relying on scanning alone. It also advises against communicating meaning only through colour.
Use a plain-language instruction such as Book online or Claim the offer. Leave clear space around the code, avoid decorative interference and test the printed version rather than assuming an on-screen scan proves it will work.
- Keep access together: Place the short address beside the code so readers don't have to search for an alternative.
- Test the destination: Open it on several mobile devices and complete the intended action.
- Label the outcome: Tell people whether they're booking, viewing a menu or requesting a quotation.
For a summer café promotion, put the booking instruction and code on the front. Keep the short address beside that code, then repeat the address with the booking terms on the reverse if readers need it while checking eligibility.
Measure the response without creating a dead end
Use a stable address under the business's control that redirects to the campaign page. That lets the business update the destination without invalidating printed stock, rather than depending on an expiring temporary service.
EventUploader's guide to analyze QR campaign performance is useful when planning how to distinguish responses from different placements. Track completed bookings or enquiries as well as scans, because opening a page isn't the same as becoming a customer.
A working code isn't enough. The page must explain the same offer the reader is holding.
Write offer dates clearly and keep an explanatory page live after the campaign closes. For the café example, an archived offer page can state that booking has ended and direct visitors to the current menu without pretending the old offer remains available.
Choosing Paper Weight and Finish for Two Sides
Paper weight and finish for double-sided A5 flyers
| Paper weight | Best use | Show-through and feel |
|---|---|---|
| 115 gsm uncoated | Quick handouts and short-life promotions | High show-through with dense reverse text |
| 130 gsm silk or matt | Standard double-sided flyers for everyday campaigns | Moderate show-through, needs matt finish for dense text |
| 150 gsm silk or matt | Premium feel for offers and event invitations | Low show-through, comfortable to hold |
| 170 gsm silk or matt | Flyers that stand on a counter or stay in a display | Minimal show-through, firm handling |
| 350 gsm uncoated recycled | Writable, tactile flyers for notes and thank-you handouts | Very low show-through, card-like weight |
Treat these as selection starting points rather than opacity guarantees. Paper composition, ink coverage and the position of dark artwork all affect what readers see through the sheet.
Judge both faces together
Paper weight affects handling and readability. Lightweight stock is easy to distribute in quantity, but dense reverse text or a dark photograph can become visible through a pale front.
Inspect the actual printed combination. A light background doesn't hide reverse-side printing, and putting a dark panel directly behind small front-side text can make that text harder to read.
Heavier paper feels firmer, but it isn't automatically necessary. A restrained layout may work on a lighter sheet, while a heavily inked design needs more opacity. For counter displays, check the holder too: a firm flyer still needs support if it's expected to remain upright.
Choose finish for the reading conditions
Matt reduces glare under shop lights and suits detailed reverse-side copy. Gloss can strengthen the appearance of photographs, but reflections can obscure smaller text when someone tilts the sheet.
Uncoated paper is useful when staff or customers need to write on it. The Print Warehouse's recycled flyer option uses 350 gsm uncoated recycled stock for writable, tactile handouts; confirm the final paper choice on the order page.
The UK statistics on waste report a 73.4 per cent recycling rate for UK paper and cardboard packaging in 2023. That covers packaging, not flyers, and doesn't guarantee that an individual printed item will be recovered.
Unnecessary laminates, plastic coatings and contamination can complicate fibre recovery. Choose uncoated or lightly finished stock where practical, rather than adding a finish because it appears more substantial.
Stock selection: Pick the lightest sheet that keeps the reverse from interfering with the front, then confirm the choice using a physical print on the intended paper.
Matching Print Quantity to Distribution and Budget
How many people will receive the flyer? Through which channel, over what period, and will different audiences need different versions? Those answers should determine the order before a lower unit price tempts you into buying surplus stock.
For an event, separate expected handouts from copies placed on tables or included in bags. For a door drop, use the planned delivery coverage. For counter stock, consider how quickly staff can distribute it before the offer becomes outdated.
Plan for retention, not guaranteed sales
IMS Group's leaflet distribution article cites figures stating that 89 per cent of consumers remember door-drop mailings more than any other method, 45 per cent save pamphlets on a pinboard or in a kitchen drawer, and a door drop is opened an average of 3.1 times per month. The same source reports that door drops led to 4 per cent of purchases in 2021 and had 11 per cent effectiveness across the client journey.
These are reported door-drop measures, not a response forecast for your campaign. Their practical value is in planning something worth keeping, such as clear opening times, directions or a useful offer code.
A lasting reverse-side detail may support a larger distribution plan. It doesn't justify ordering more copies than you can deliver while the information remains accurate.
Compare complete specifications
Quantity bands, paper weight, finishing and single-sided versus double-sided printing all affect the total. The Print Warehouse offers bulk order discounts for larger runs, but compare the final specification through its leaflet printing options, not an isolated starting price.
- Test before scaling: Use a smaller run with different reverse-side response codes, keeping the offer and distribution conditions comparable.
- Allow for handling losses: Include a sensible buffer for damaged or unusable copies without treating over-ordering as insurance against every possibility.
- Include distribution costs: Staff time, delivery arrangements and storage matter alongside the print invoice.
- Check the checkout total: Confirm stock, finish, sides, quantity and delivery before paying.
Judge the test by completed actions and the value of those actions. A design that generates enquiries from suitable customers can be more useful than one that attracts plenty of scans but no bookings.
Prepare, Proof and Order Your Flyer
A proof that looks right on screen can still fail as a physical flyer. Check the file, the stock and the delivery schedule before approving the order. Keep one clearly named final PDF, and make sure the person approving it can confirm the offer, contact details and spend.
Follow a production routine
Use the dimensions and safe area specified above. Confirm the reverse's flip direction with the printer, and make a marked paper dummy if the orientation is unclear.
Keep key details clear on both sides. Check the full clear space around each QR code, not only its dark pattern.
Prepare colour for the chosen workflow. Use CMYK where the printer requires it. Bright RGB blues and greens can shift on paper, so inspect the converted artwork if colour accuracy matters.
Export a print-ready PDF. Keep photographs at sufficient resolution for their placed size, and retain text and vector logos as vectors where possible.
Select the specification and upload the final file. Choose the stock, finish, quantity and printed sides, then open the preview. Check that the upload is the approved version, not a draft with a similar filename.
Check the screen proof, then inspect a physical copy. Use the screen proof to check page order, visible content and cut-off text. Print a sample at actual size without fit-to-page scaling, trim it and turn it in the intended direction. For a demanding design, request a sample on the intended material before committing to the full run.
Approve before the displayed cut-off. If the artwork changes afterwards, check whether a replacement upload and fresh approval are needed.
Know what each proof can confirm
A screen proof checks placement and page order; it cannot show the exact feel of the stock or reliably reveal glare and ink show-through. A home print helps assess reading size and turning direction, but ordinary office paper does not represent the chosen production stock.
Check fonts in the exported PDF, not only in the editable file. Embed them where the workflow allows, and inspect symbols, currency signs and accented characters for substitutions.
The Print Warehouse Ltd provides online artwork upload and preview proofs. If choosing laminated flyers, consider whether surface protection suits the design, and check how the finish affects reading and writing.
Separate production from delivery
Production turnaround and delivery are separate parts of the schedule. Approval may start production, but the parcel still has to travel.
Use the timing displayed at checkout rather than assuming an express option guarantees arrival for a particular event. Allow time to receive, inspect and distribute the flyers. If a campaign starts when a venue opens, the copies need to be ready for staff before opening.
Run a five-minute pre-order check
- Front action: A reader can identify what to do without weighing up competing headlines.
- Reverse readability: Essential details are at least 12 point, with comfortable spacing.
- Response route: The printed URL works, the code scans from the physical draft, and the destination completes the promised task.
- Offer accuracy: Dates, exclusions, prices and booking conditions match the campaign.
- Material choice: Paper and finish suit the reverse layout and intended handling.
- Quantity: The order matches the distribution plan, with a test run where useful.
- Delivery: The selected service leaves time before the campaign starts.
Ask someone who has not edited the artwork to proofread it. Have them check phone numbers and addresses character by character, then read the offer from a customer's point of view.
Upload the final PDF, check the proof at actual size and approve only when both sides are clear and ready to print. For double-sided flyer printing, select the specification and review the proof before confirming the order.